Wej-it

1/2" x 7" Ankr-TITE® CCAT Cracked Concrete Anchor, 25/Box

(No reviews yet) Write a Review
SKU:
WA127;WC
UPC:
013918416955
MPN:
CCAT1270
Availability:
Contact us for information, see page for alternatives.
$55.68

OUT OF STOCK

Frequently bought together:

Description

  • Bolt Size is Hole Size 
  • Available in four combinations
    1. Zinc plated carbon steel with steel clip
    2. Hot-dip galvanized carbon steel with 304 stainless steel clip
    3. All 304 stainless steel
    4. All 316 stainless steel
  • Sets up fast - Needs less rotation to achieve required torque
  • Unique "safety shoulder" - Supports clip when anchor is under strain and minimizes bolt-end collapse and/or clip slippage under ultimate loading conditions
  • Enlarged dimples on clip - Reduce slip and increase response in lighter concrete
  • 360° segment contact on clip equalizes load distribution : Increases load-carrying capacity - More adaptable to"forgiving" in different installation conditions

Applications 
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment 
The anchor is designed for use in a dry environment.

Hole Diameter/Bit Diameter 
The anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor  
The diameter of the anchor is 1/2".

Length Anchor  
The length of the anchor is 7"

Thread Type  
The threads on the anchor are national coarse threads that measures 1/2" with 13 threads per inch, commonly referred to as 1/2"-13.

Thread Length 
The length of the threads on the anchor is 4-1/2" in length.

Packaging 
The anchor is packaged with 25 pieces per box and is packaged with the correct number and diameter of nuts and washers.

Depth of Hole 
The depth of the hole that is required for the anchor should be a minimum of 1/2" deeper than the anchor will penetrate the concrete. This will allow space for dust created during the installation process to fall, which will prevent the anchor from bottoming out in the hole before full penetration into the concrete.

Fixture Hole Diameter 
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 9/16".

Wrench Size  
The size of the wrench required to turn the nut to set the anchor is 3/4".

Torque Value 
To be set properly in the concrete, the anchor must be torqued to between 75 ft./lbs.

Markings 
The anchor is stamped with the letter L on the threaded end to allow inspection of the anchor after installation. The letter "L" designates an overall length of the anchor as between 7" up to, but not including 7-1/2" in length.

Products Specifications 
Bit Size 1/2"
Minimum Embedment 2-1/4"
Thread Length 4"
Primary Concrete only
Environment Dry
Thread Type 1/2" - 13
2000 PSI Concrete - Pull-Out (lbs.) * 2999
2000 PSI Concrete - Shear (lbs.) * 5564
Type Male
Diameter 1/2"
Length 7"
Material Carbon Steel Zinc Plated
Box Qty 25
Minimum Spacing 5"
Minimum Edge Distance 2-1/2"
Minimum Fixture Hole Diameter (In Place) 5/8"
Minimum Fixture Hole Diameter (Hole Spotted) 1/2"
Length ID Code L
Maximum Torque 50 - 60 ft./lbs.
Wrench Size For Nut 3/4"
Length Measurement End to End
Brand Name Wej-It
Product Type Wedge
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
View AllClose

Additional Information

Bit Size:
1/2"
Minimum Embedment:
2-1/4"
Thread Length:
4"
Primary:
Concrete only
Environment:
Dry
Thread Type:
1/2" - 13
2000 PSI Concrete - Pull-Out (lbs.) *:
2999
2000 PSI Concrete - Shear (lbs.) *:
5564
Type:
Male
Diameter:
1/2"
Length:
7"
Material:
Carbon Steel Zinc Plated
Box Qty:
25
Minimum Spacing:
5"
Minimum Edge Distance:
2-1/2"
Minimum Fixture Hole Diameter (In Place):
5/8"
Minimum Fixture Hole Diameter (Hole Spotted):
1/2"
Length ID Code:
L
Maximum Torque:
50 - 60 ft./lbs.
Wrench Size For Nut:
3/4"
Length Measurement:
End to End
Brand Name:
Wej-It
View AllClose