3/16" Toggler Brand SnapToggle, 100/Box

(No reviews yet) Write a Review
In Stock, Ships Today!
Frequently bought together:


Products Features 
  • HIGH STRENGTH:  Hold up to TWICE the load of an old fashioned wing toggle bolt of the same size 
  • CAN BE USED IN SAME HOLE:  Bolt can be removed without losing the anchor behind the wall 
  • SMALLER HOLE REQUIRED:  Hole size is 50% less than the standard toggle bolt 
  • INSULATION PUSHED ASIDE:  Metal channel pushes any insulation aside making installation fast and easy 

The anchor is made from Polystyrene, Carbon Zinc Plated, and is Zinc Plated. This anchor is designed for use in .

The anchor is designed for use in a dry environment.

Hole Diameter/Bit Diameter 
The anchor requires a 1/2" hole to be drilled in the base material (). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor 
The diameter of the anchor is 3/16".

The anchor is packaged with 100 pieces per box .

Depth of Hole 
The depth of the hole that is required for the anchor should be a minimum of 1/2" deeper than the anchor will penetrate the concrete. This will allow space for dust created during the installation process to fall, which will prevent the anchor from bottoming out in the hole before full penetration into the concrete.

Products specifications 
Bit Size  3/8" 
Minimum Embedment  See PDF 
Environment  Dry 
Material  Carbon Steel 
Thread Type  Undercut Design 
Type  Male 
Diameter  3/8" 
Length  4" 
Box Qty  50 
Minimum Spacing  See PDF 
Minimum Edge Distance  See PDF 
Minimum Fixture Hole Diameter (In Place)  1/2" 
Minimum Fixture Hole Diameter (Hole Spotted)  1/2" 
Length Measurement  Overall length including head 
Brand Name  Simpson Strong-Tie 
Concrete Application  Cracked & Uncracked Approved 
Head Type  Countersunk Phillips 
Product Type  Concrete Screw 
View AllClose

Additional Information

Thread Type:
3/16" - 24
Brand Name:
Mechanical Plastics
Polystyrene, Carbon Zinc Plated
Bit Size:
View AllClose