Hilti

3/4" x 12" Hilti Kwik Bolt 3 Carbon Steel Anchor, 10/Box

(No reviews yet) Write a Review
SKU:
WA3412;H
MPN:
286016
Availability:
Ships in 1-3 days!
$474.11
Frequently bought together:

Description

Products Features
  • ZINC ​PLATED: Helps ​prevent ​rust ​in ​dry ​environments; dependable ​application ​and ​maintenance
  • WIDE ​RANGE ​OF ​SIZES: Ensures ​correct ​fastener ​for ​effective ​results
  • FOR ​USE ​IN ​CONCRETE ​ONLY: Provides ​most ​consistent ​holding ​values; ​secure application
  • PACKAGED ​WITH​ ​NUTS ​AND ​WASHER: Fast, ​quick, ​complete ​installation
  • HOLE ​SIZE ​IS ​ANCHOR ​SIZE: Quick ​and ​easy ​installation; ​simple ​to ​order

Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/4" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/4".

Length Anchor
The length of the anchor is 12"

Thread Type
The threads on the anchor are national coarse threads that measures 3/4" with 10 threads per inch, commonly referred to as 3/4"-10.

Thread Length
The length of the threads on the anchor is 5-7/8" in length.

Packaging
The anchor is packaged with 10 pieces per box and is packaged with the correct number and diameter of nuts and washers.

Depth of Hole
The depth of the hole that is required for the anchor should be a minimum of 1/2" deeper than the anchor will penetrate the concrete. This will allow space for dust created during the installation process to fall, which will prevent the anchor from bottoming out in the hole before full penetration into the concrete.

Wrench Size
The size of the wrench required to turn the nut to set the anchor is 1-1/8".

Torque Value
To be set properly in the concrete, the anchor must be torqued to between 110 ft./lbs.

Markings
The anchor is stamped with the letter T on the threaded end to allow inspection of the anchor after installation. The letter "T" designates an overall length of the anchor as between 12" up to, but not including 13" in length.

Products Specifications
Bit Size3/4"
Minimum EmbedmentSee PDF
Thread Length5-7/8"
PrimaryConcrete only
EnvironmentDry
Thread Type3/4" - 10
TypeMale
Diameter3/4"
Length12"
MaterialCarbon Steel Zinc Plated
Box Qty10
Minimum SpacingSee PDF
Minimum Edge DistanceSee PDF
Maximum Fixture ThicknessSee PDF
Minimum Fixture Hole Diameter (In Place)13/16"
Minimum Fixture Hole Diameter (Hole Spotted)3/4"
Length ID CodeT
Maximum Torque110 ft./lbs.
Wrench Size For Nut1-1/8"
Length MeasurementEnd to End
Brand NameHilti
Downloads 

pdfTechnical Data

View AllClose

Additional Information

Bit Size:
3/4"
Minimum Embedment:
See PDF
Thread Length:
5-7/8"
Primary:
Concrete only
Environment:
Dry
Thread Type:
3/4" - 10
Type:
Male
Diameter:
3/4"
Length:
12"
Material:
Zinc Plated
Box Qty:
10
Minimum Spacing:
See PDF
Minimum Edge Distance:
See PDF
Maximum Fixture Thickness:
See PDF
Minimum Fixture Hole Diameter (In Place):
13/16"
Minimum Fixture Hole Diameter (Hole Spotted):
3/4"
Length ID Code:
T
Maximum Torque:
110 ft./lbs.
Wrench Size For Nut:
1-1/8"
Length Measurement:
End to End
Brand Name:
Hilti
View AllClose