Free Shipping
$25 or more
CONFAST® Carbide SDS Max Bit
Order now and receive free freight! Every CONFAST® Carbide SDS Max Bit is in stock for immediate shipping.
SDS-Max bits are carbide-tipped bits used for drilling holes in concrete, brick or block base material. The tip of the bit is made out of carbide. The SDS-Max carbide-tipped bits are used in large electro-pneumatic hammer drills. The SDS-Max bits are attached to the electro-pneumatic hammer drill via a keyless chuck. Our SDS-Max bits are American made from premium quality steel and carbide. The SDS-Max bits are available in diameters from 3/8" to 1-1/2" and lengths up to 48".
Display
per page
| Part # | Brand / Size | Box Qty | Bit Size | Shipping | Price / Box | # of Boxes | Add | |
|---|---|---|---|---|---|---|---|---|
|
MAX5818 |
TruCut 5/8" x 18" |
1 | Ships Today | $54.12 | |||
|
MAX5823 |
TruCut 5/8" x 23-1/2" |
1 | Ships Today | $57.40 | |||
|
MAX3413 |
TruCut 3/4" x 13" |
1 | Ships Today | $45.91 | |||
|
MAX3418 |
TruCut 3/4" x 18" |
1 | Ships Today | $57.40 | |||
|
MAX3423 |
TruCut 3/4" x 23-1/2" |
1 | Ships Today | $62.32 | |||
|
MAX7813 |
TruCut 7/8" x 13" |
1 | Ships Today | $52.48 | |||
|
MAX7818 |
TruCut 7/8" x 18" |
1 | Ships Today | $70.51 | |||
|
MAX7823 |
TruCut 7/8" x 23-1/2" |
1 | Ships Today | $77.07 | |||
|
MAX113 |
TruCut 1" x 13" |
1 | Ships Today | $72.15 | |||
|
MAX123 |
TruCut 1" x 23-1/2" |
1 | Ships Today | $85.28 | |||
|
MAX11813 |
TruCut 1-1/8" x 13" |
1 | Ships Today | $83.64 | |||
|
MAX11823 |
TruCut 1-1/8" x 23-1/2" |
1 | Ships Today | $114.79 |
Concrete Bit
USES• The SDS-Max concrete bit has a carbide tip and is used for drilling holes in concrete.
• The shorter bits, such as the 3/8” x 13” SDS-Max concrete bit, are primarily used to drill holes for the installation of concrete fasteners.
• The longer SDS-Max concrete bits are used to drill through holes for running electrical conduit or other type of pipes.
SDS-Max
• The SDS-Max concrete bit is designed specifically for larger hammer drills that use the quick disconnect chuck that accepts the SDS-Max style shank.
• Many of the large Hilti combi hammer drills utilize the SDS-Max style for the shanks of their drill bits.
• The shank of the SDS-Max concrete bit is approximately 3/4” in diameter, which is much larger than the smaller SDS bits that are approximately 3/8” in diameter.
Chuck Style
• The SDS-Max concrete bits have groove cut into the shank that allows the bit to move in the chuck to provide extra strength for rotation.
• The grooves allow for a more powerful hammering and rotation motion, which results in faster drilling speed and efficient dust removal.
• Special fluting of the SDS-Max concrete bit provides for increased dust removal, which permits faster drill speed.
SIZES
• Ranging in diameters from 3/8” to 2” and in lengths from 13” to 36”, there is a SDS-Max concrete bit available to meet a wide range of drilling requirements.
• The designated length of the SDS-Max concrete bit is an overall length measured from end to end.
• The drilling depth is 6” to 7” less than the overall length, and is measured as flute length of the shank of the SDS-Max concrete bit.