CONFAST®

1/4" x 2" Stainless Steel Hammer Drive Anchor, 100/Box

(No reviews yet) Write a Review

SKU:: HDS142
UPC:: 820274003640
MPN:
Availability:: In Stock, Ships Today!

Picture of 1/4" x 2" Stainless Steel Hammer Drive Anchor, 100/Box

$133.02

Current Stock:

Quantity:

Description
Additional Information

Description

Products Features

INSTALLS IN A VARIETY OF BASE MATERIALS: Can be used in a variety of applications; job will be easier and faster
MUSHROOM HEAD: Lager bearing surface provides improved pullover characteristics
ANCHOR DIAMETER IS HOLE DIAMETER: Creates easily determined hole size for simple application process
ALL SIZES PACKAGED 100 PIECES PER BOX: Standardized quantity amount for purchase planning and usage
PERMANENT FASTENING: Once installed, fastener cannot be removed; very secure

Products specifications

Bit Size	1/4"
Box Qty	100
Minimum Embedment	3/4"
Head Type	Mushroom
Minimum Edge Distance	1-1/4"
Maximum Fixture Thickness	1-1/4"
Minimum Fixture Hole Diameter (In Place)	5/16"
Minimum Fixture Hole Diameter (Hole Spotted)	5/16"
Brand Name	CONFAST®
Minimum Spacing	2-1/2"
2000 PSI Concrete - Pull-Out (lbs.) *	405
2000 PSI Concrete - Shear (lbs.) *	450
Length Measurement	Underneath head
Diameter	1/4"
Length	2"
Material	Zamac body - 304 Stainless steel nail
Environment	Wet
Type	Male

* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load

Installation Video

Installing a 1/4" x 2" (two inches) Stainless Steel Hammer Drive Anchor

Drill a 1/4" hole into the concrete using a carbide tipped bit that meets ANSI Standards B212.15.
Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 3/4" is met.
The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 1/4" x 2" (two inches) Stainless Steel Hammer Drive Anchor is 5/16".
Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
Insert the 1/4" x 2" (two inches) Stainless Steel Hammer Drive Anchor, slit end first, through the material to be fastened and into the hole, ensuring that the bottom of the head is sitting flush with the fixture plate.
Hammer the nail flush into the head of the anchor body.
Always use proper personal protective equipment per manufacturers and OSHA instructions.

View AllClose

Additional Information

Bit Size:	1/4"
Minimum Embedment:	3/4"
Type:	Male
Material:	Zamac body - 304 Stainless steel nail
Environment:	Wet
2000 PSI Concrete - Pull-Out (lbs.) *:	405
2000 PSI Concrete - Shear (lbs.) *:	450
Diameter:	1/4"
Length:	2"
Box Qty:	100
Minimum Spacing:	2-1/2"
Minimum Edge Distance:	1-1/4"
Maximum Fixture Thickness:	1-1/4"
Minimum Fixture Hole Diameter (In Place):	5/16"
Minimum Fixture Hole Diameter (Hole Spotted):	5/16"
Head Type:	Mushroom
Length Measurement:	Underneath head
Brand Name:	CONFAST

View AllClose

We're currently collecting product reviews for this item. In the meantime, here are some reviews from our past customers sharing their overall shopping experience.

4.8

Out of 5.0