CONFAST®

5/16" x 3-1/2" Flat Slotted Sleeve Anchor Zinc Plated, 50/Box

(No reviews yet) Write a Review
SKU:
SAF516312
UPC:
820274001387
Availability:
In Stock, Ships Today!
$55.84

Description

Products Features 
  • VARIETY OF HEAD STYLES HEX, ACORN, FLAT AND ROUND:  Meets most application requirements with one style anchor; offers choices 
  • 360 DEGREE EXPANSION:  Provides consistent and reliable holding values in a wide range of base materials 
  • PRE-ASSEMBLED AND READY TO INSTALL:  No need to purchase bolts, nuts, and washers separately; convenient application process 
  • ANCHOR SIZE IS BIT​ ​SIZE:  Simple, fast and provides consistent tolerance for optimal results 
  • AVAILABLE IN ZINC PLATED AND 304 STAINLESS STEEL:  Anchor choices provide ​for both dry or wet environments; versatile application to meet environmental conditions 
Products specifications 
Bit Size 5/16" 
Box Qty 100 
Minimum Embedment 1" 
Head Type Flat Countersunk 
Thread Type 1/4" - 20 
Minimum Edge Distance 1-9/16" 
Maximum Fixture Thickness 2-1/2" 
Minimum Fixture Hole Diameter (In Place) 3/8" 
Brand Name CONFAST® 
2000 PSI Concrete - Pull-Out (lbs.) * 903 
2000 PSI Concrete - Shear (lbs.) * 1770 
Length Measurement Overall length including head 
Diameter 5/16" 
Length 3-1/2" 
Material Carbon Steel Zinc Plated 
Environment Dry 
Type Male 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Application Video 

Installation Video 
Installing a 5/16" x 3-1/2" Flat Slotted Sleeve Anchor Zinc Plated 
  1. Drill a 5/16" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 1" is met. 
  3. The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 5/16" x 3-1/2" Flat Slotted Sleeve Anchor Zinc Plated is 3/8". 
  4. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  5. The 5/16" x 3-1/2" Flat Slotted Sleeve Anchor Zinc Plated is manufactured and sold fully assembled with nut and washer. It is important that the nut is on the end of the threads to protect the threads when it is struck by a hammer during installation. 
  6. Insert the anchor though the fixture hole and into the hole in the base material. A hammer will be required to pound the sleeve anchor into the base material until the washer and nut are tight against the fixture. 
  7. Tighten the nut on the 5/16" x 3-1/2" Flat Slotted Sleeve Anchor Zinc Plated until finger tight by turning clockwise. 
  8. Using a flat screwdriver, turn the nut 2 to 4 times until snug or until the proper torque value of 8 - 12 Ft./lbs. is reached. 
  9. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

Application Photos 
5/16" x 3-1/2" zinc plated flat head countersunk sleeve anchor - concrete -window 5/16" x 3-1/2" zinc plated flat head countersunk sleeve anchor - block - night light
View AllClose

Additional Information

Bit Size:
5/16"
Minimum Embedment:
1"
Thread Type:
1/4" - 20
Material:
Carbon Steel Zinc Plated
Environment:
Dry
2000 PSI Concrete - Pull-Out (lbs.) *:
903
2000 PSI Concrete - Shear (lbs.) *:
1770
Type:
Male
Diameter:
5/16"
Length:
3-1/2"
Box Qty:
100
Minimum Edge Distance:
1-9/16"
Maximum Fixture Thickness:
2-1/2"
Minimum Fixture Hole Diameter (In Place):
3/8"
Maximum Torque:
8 - 12 Ft./lbs.
Head Type:
Flat Countersunk
Length Measurement:
Overall length including head
Brand Name:
CONFAST
View AllClose
4
Out of 5.0
A graph showing this site's review totals.
Overall Rating
100%
of customers that buy
from this merchant give
them a 4 or 5-Star rating.
Verified Buyer
“Good value”
09/02/2019 by Tadd K. (FL, United States)
“I used these to hang plywood over my windows for hurricane protection. They were easy to install and worked great. With this particular version of the product you have to know, pretty closely, the exact length you need due to the way it functions. It would have been MUCH better to have a fully threaded stud with a hex nut and washer. But that was not an available option. I plan to use more of these to add in areas where I had to use Tapcon screws due to length constraints, IF they are available. Otherwise, great product, decent price for quantities (much better than Amazon or a hardware store), delivery was very timely, and that was a must with the hurricane nearing down on us. Btw, I am speaking of hurricane Dorian!”