CONFAST®
1/4" x 1-1/4" Hammer Drive Anchor, 100/Box
- SKU:
- HD14114
- UPC:
- 820274000618
- Availability:
- In Stock, Ships Today!
Description
Products Features
- INSTALLS IN A VARIETY OF BASE MATERIALS: Can be used in a variety of applications; job will be easier and faster
- MUSHROOM HEAD: Lager bearing surface provides improved pullover characteristics
- ANCHOR DIAMETER IS HOLE DIAMETER: Creates easily determined hole size for simple application process
- ALL SIZES PACKAGED 100 PIECES PER BOX: Standardized quantity amount for purchase planning and usage
- PERMANENT FASTENING: Once installed, fastener cannot be removed; very secure
Products specifications
| Bit Size | 1/4" |
| Box Qty | 100 |
| Minimum Embedment | 3/4" |
| Head Type | Mushroom |
| Minimum Edge Distance | 1-1/4" |
| Maximum Fixture Thickness | 1/2" |
| Minimum Fixture Hole Diameter (In Place) | 5/16" |
| Minimum Fixture Hole Diameter (Hole Spotted) | 5/16" |
| Brand Name | CONFAST® |
| Minimum Spacing | 2-1/2" |
| 2000 PSI Concrete - Pull-Out (lbs.) * | 405 |
| 2000 PSI Concrete - Shear (lbs.) * | 450 |
| Length Measurement | Underneath head |
| Diameter | 1/4" |
| Length | 1-1/4" |
| Material | Zamac |
| Environment | Dry |
| Type | Male |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video
Installing a 1/4" x 1-1/4" Hammer Drive Anchor - Drill a 1/4" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
- Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 3/4" is met.
- The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 1/4" x 1-1/4" Hammer Drive Anchor is 5/16".
- Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
- Insert the 1/4" x 1-1/4" Hammer Drive Anchor, slit end first, through the material to be fastened and into the hole, ensuring that the bottom of the head is sitting flush with the fixture plate.
- Hammer the nail flush into the head of the anchor body.
- Always use proper personal protective equipment per manufacturer's and OSHA instructions.
Application Photos
Additional Information
Bit Size: |
1/4" |
Minimum Embedment: |
3/4" |
Type: |
Male |
Material: |
Zamac |
Environment: |
Dry |
2000 PSI Concrete - Pull-Out (lbs.) *: |
405 |
2000 PSI Concrete - Shear (lbs.) *: |
450 |
Diameter: |
1/4" |
Length: |
1-1/4" |
Box Qty: |
100 |
Minimum Spacing: |
2-1/2" |
Minimum Edge Distance: |
1-1/4" |
Maximum Fixture Thickness: |
1/2" |
Minimum Fixture Hole Diameter (In Place): |
5/16" |
Minimum Fixture Hole Diameter (Hole Spotted): |
5/16" |
Head Type: |
Mushroom |
Length Measurement: |
Underneath head |
Brand Name: |
CONFAST |
Related Products
1/4" x 4" Hammer Bit, Each
TruCut®
$5.00
In Stock, Ships Today!
SKU:
HB144
Products Features TRICARB® CARBIDE: Guarantees longer bit life and speedier penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal allows...
1/4" x 4-5/8" SDS Bit, Each
TruCut®
$10.01
In Stock, Ships Today!
SKU:
SDS144
Products Features TRICARB® CARBIDE: Longer bit life and quick penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN: Faster dust removal provides faster...
1/4" x 1-1/4" Split Drive Round Zinc Plated, 100/Box
CONFAST®
$15.74
Contact us for information, see page for alternatives.
SKU:
SDR14114
Bit Size:
1/4"
Products Features
TAMPERPROOF: Anchor cannot be removed; provides security for item being attached
FLAT COUNTERSUNK HEAD: Ideal for fastening wood to concrete where head...
