Ultracon®

1/4" x 5" Ultracon 410 Stainless Steel Silver Climaseal® Coated SHW4-500, 100/Box

(No reviews yet) Write a Review

SKU:: CSHS145;T
UPC:
MPN:: SHW4-500
Availability:: In Stock, Ships Today!

$343.79

Quantity:

Description
Additional Information

Description

Products Features

LOWER INSTALLATION TORQUE: Fast easy installation; saves time
HIGHER HOLDING VALUES: Higher quality installation; optimal holding strength
CLIMASEAL® COATING: Provides long-lasting rust resistance exterior
AMERICAN MADE: A high-quality domestic product

Products specifications

Bit Size	7/32"
Box Qty	100
Minimum Embedment	1"
Head Type	Hex Washer
Thread Type	Hi-Lo
Minimum Edge Distance	3"
Maximum Fixture Thickness	4"
Minimum Fixture Hole Diameter (In Place)	5/16"
Minimum Fixture Hole Diameter (Hole Spotted)	5/16"
Brand Name	Ultracon
Driver Size	5/16"
Minimum Spacing	4"
Thread Length	1-3/4"
2000 PSI Concrete - Pull-Out (lbs.) *	750
2000 PSI Concrete - Shear (lbs.) *	900
Length Measurement	Underneath head
Diameter	1/4"
Length	5"
Material	410 Stainless Steel Silver Climaseal® Coated
Environment	Moist
Type	Male

* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load

Application Video

Installation Video

Installing a 1/4" x 5" (five inches) 410 Stainless Steel Hex Crete-Flex Concrete Screw

Drill a 7/32" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 1" is met.
The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 1/4" x 5" (five inches) 410 Stainless Steel Hex Crete-Flex Concrete Screw is 5/16".
Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
Insert the point of the 1/4" x 5" (five inches) 410 Stainless Steel Hex Crete-Flex Concrete Screw into the hole. Make sure that the screw being installed will penetrate the base material a minimum of 1" but no deeper than 1-3/4".
Using a 5/16" nut driver hex driver for the anchor , turn the screw clockwise, applying slight pressure until the head of the screw is snug against the material being fastened.
Always use proper personal protective equipment per manufacturer's and OSHA instructions.

Product Video

Downloads

Installation Document

Technical Document

View AllClose

Additional Information

Bit Size:	3/16"
Minimum Embedment:	1"
Thread Length:	1-3/4"
Environment:	Moist
Material:	410 Stainless Steel Silver Climaseal® Coated
Thread Type:	Hi-Lo
2000 PSI Concrete - Pull-Out (lbs.) *:	750
2000 PSI Concrete - Shear (lbs.) *:	900
Type:	Male
Diameter:	1/4"
Length:	5"
Box Qty:	100
Minimum Spacing:	4"
Minimum Edge Distance:	3"
Maximum Fixture Thickness:	4"
Minimum Fixture Hole Diameter (In Place):	5/16"
Minimum Fixture Hole Diameter (Hole Spotted):	5/16"
Head Type:	Hex Washer
Length Measurement:	Underneath head
Driver Size:	5/16"
Brand Name:	Ultracon