JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser for full functionality of this website.
 
You have no items in your shopping cart.
Free Shipping
$25 or more
               
 
 

3/16" x 1-1/4" Flat Phillips CONFAST® Concrete Screw, 100/Box

$7.00 per Box of 100
    Payment types
   Availability: In Stock / Ships Today
  Questions?

SKU: CSF316114
  MFG: CONFAST®

 

  • Customer Reviews
  • EV MDC SSL
    EV MDC SSL


Products Features
  • COMPLETE ​LINE: Ensures ​correct ​product ​can ​be ​located ​and ​purchased ​for ​any ​job
  • ALL ​LENGTHS ​ARE ​AVAILABLE: Using ​the ​correct ​length ​screw ​ensures ​quality, ​secure ​fastening
  • SPECIAL ​THREADS: Decreases ​installation ​torque ​allowing ​screw ​to ​be ​installed ​faster and ​easier
  • TWO​ ​DIAMETERS: ​3/16" ​and ​1/4" Choice ​allows ​for ​wider ​variety ​of ​fastening ​applications depending ​on ​the ​hole ​in ​the ​fixture ​being ​attached
  • BIT ​INCLUDED ​IN ​EACH​ ​BOX: Using the correct ​bit ​will give you ​better-​holding ​values
Products specifications
Bit Size 5/32"
Minimum Embedment 1"
Thread Length 1-1/4"
Thread Type High-Low
2000 PSI Concrete - Pull-Out (lbs.) * 450
2000 PSI Concrete - Shear (lbs.) * 540
Type Male
Diameter 3/16"
Length 1-1/4"
Material Carbon Steel - Blue Coated
Environment Dry
Box Qty 100
Minimum Spacing 3"
Minimum Edge Distance 2-1/4"
Maximum Fixture Thickness 0" to 1/4"
Minimum Fixture Hole Diameter (In Place) 1/4"
Minimum Fixture Hole Diameter (Hole Spotted) 1/4"
Length Measurement Overall length including head
Driver Size #2
Brand Name CONFAST®
Application Video

Installation Video
Installing a 3/16" x 1-1/4" Flat Phillips CONFAST® Concrete Screw
  1. Drill a 5/32" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
  2. Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 1" is met.
  3. The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 3/16" x 1-1/4" Flat Phillips CONFAST® Concrete Screw is 1/4".
  4. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
  5. Insert the point of the 3/16" x 1-1/4" Flat Phillips CONFAST® Concrete Screw into the hole. Make sure that the screw being installed will penetrate the base material a minimum of 1" but no deeper than 1-3/4".
  6. Using a #2 bit tip Phillips bit tip for the anchor , turn the screw clockwise, applying slight pressure until the head of the screw is snug against the material being fastened.
  7. Always use proper personal protective equipment per manufacturer's and OSHA instructions.

Product Reviews

* The figures above indicate average ultimate tension and shear failure values. A safety factor of 4:1 or 25% of ultimate value is generally accepted as a safe working load. Reference should always be made to applicable codes.



* The bits are recommended by diameter and may not necessarily be the length needed for your application. Please make sure the usable length will work for your application. *

Questions? Comments?
Contact Us

*
*
*