Simpson Strong-Tie

3/16" x 2-3/4" Simpson Strong-Tie Titen Turbo® Hex-Head Concrete Screw TNT18234H, 100/Box

(No reviews yet) Write a Review
SKU:
CSH316234;SC
UPC:
707392005032
Availability:
In Stock, Ships Today!
$13.58

Description

  • Torque Reduction Channel that traps dust where it can’t obstruct the thread action, reducing the likelihood of binding in the hole (patent pending)
  • Code listed in accordance with ICC-ES AC193 for concrete applications without cleaning dust from predrilled holes (IAPMO UES ER-712)
  • Serrated screw point for easier starts when fastening wood
  • Matched-tolerance bit not required; use a standard ANSI drill bit for installation
  • Zinc plated with a baked-on ceramic coating
  • Designed for installation with a cordless drill or impact driver
  • Use in dry interior environments only
  • Drill bit diameter: 5/32 in.
  • Drive type: 1/4-in. hex head
  • Quantity: 100
Products specifications
Bit Size5/32"
Minimum EmbedmentSee PDF
Box Qty100
TypeMale
Diameter3/16
Length2 3/4
MaterialCarbon Steel
EnvironmentDry
Minimum SpacingSee PDF
Minimum Edge DistanceSee PDF
Maximum Fixture ThicknessSee PDF
Minimum Fixture Hole Diameter (In Place)See PDF
Minimum Fixture Hole Diameter (Hole Spotted)See PDF
Maximum TorqueSee PDF
Wrench Size For Nut1/4
Brand NameSimpson Strong-Tie
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load

The information on this page is intended for preliminary guidance only. For complete safety and to verify accurate information, please consult the (PDF linked below) to obtain the manufacturer’s values when selecting the anchors for your project.

The Titen Turbo screw anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and snapping. This screw anchor delivers consistently trouble-free installation and fastening strength you can depend on.

Installation

  1. Drill a hole in the base material using the appropriate diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/2" to allow the thread tapping dust to settle. While not required, dust may be cleaned from a drilled hole using compressed air prior to screw installation for best results.
  2. Position fixture, insert screw and tighten using drill and Titen Turbo screw installation tool fitted with a hex socket or 6-lobe bit socket.

Caution

  • Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Steps must be taken to prevent inadvertent sustained loads above the listed allowable loads. Overtightening and bending moments can initiate cracks detrimental to the hardened screw’s performance. Use the Simpson Strong-Tie Titen installation tool kit as it has a bit that is designed to reduce the potential for overtightening the screw.
  • Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor’s load capacity.
  • Installation of concrete screw generally is influenced by many factors such as but not limited to, concrete compressive strength, type of aggregate, installation location, installation direction and tools used for installation

Link Image Catalog PDF

Link Image Product Information (on Simpson Website)

Package information
6.25 in. x 3.5 in. x 3.5 in.,  1.78 lbs.


California Prop 65 WARNING! Cancer -www.P65Warnings.ca.gov

Carton Reference 10707392005039

Pallet Reference 50707392005037

View AllClose

Additional Information

Bit Size:
5/32"
Minimum Embedment:
See PDF
Box Qty:
100
Type:
Male
Diameter:
3/16"
Length:
2-3/4"
Material:
Carbon Steel
Environment:
Dry
Minimum Spacing:
See PDF
Minimum Edge Distance:
See PDF
Maximum Fixture Thickness:
See PDF
Minimum Fixture Hole Diameter (In Place):
See PDF
Minimum Fixture Hole Diameter (Hole Spotted):
See PDF
Maximum Torque:
See PDF
Wrench Size For Nut:
1/4
Brand Name:
Simpson Strong-Tie
View AllClose