CONFAST®

1/2" Drop-In Anchor Zinc Plated, 50/Box

(No reviews yet) Write a Review
SKU:
DI12
UPC:
820274000373
Availability:
In Stock, Ships Today!
$40.72

Description

Products Features 
  • SMOOTH WALL DESIGN:  Provides contact along​ ​length of expansion area; provides consistent holding values; aesthetic appeal 
  • INTERNAL NATIONAL COARSE THREADS:  Common threads create easier ​selection of threaded rod or bolt 
  • IDEAL FOR FLUSH MOUNTING: Nothing​ ​protrudes above surface of the concrete once anchor is properly installed 
  • MOST​ ​CONSISTENT​ ​HOLDING VALUES:  Can be used in solid concrete as an internally threaded concrete fastener 
  • SLOTTED BODY IS PRECISION MATCHED TO TAPERED EXPANSION PLUG:  Ensures that the anchor is uniformly expanded ​to provide consistent holding​ ​value 
Products specifications 
Bit Size 5/8" 
Box Qty 50 
Minimum Embedment 2" 
Primary Concrete only 
Thread Type 1/2" - 13 
Minimum Edge Distance 3-1/8" 
Minimum Fixture Hole Diameter (In Place) 11/16" 
Minimum Fixture Hole Diameter (Hole Spotted) 1/2" 
Inside Anchor Diameter-Bolt Diameter 1/2" 
Outside Anchor Diameter 5/8" 
Internal Thread Length 13/16" 
Brand Name CONFAST® 
Maximum Torque 20 ft./lbs. 
Bolt Length Fixture Thickness + Embedment Depth 
2000 PSI Concrete - Pull-Out (lbs.) * 2328 
Length Measurement End to End 
Diameter 1/2" 
Length 2" 
Material Carbon Steel Zinc Plated 
Environment Dry 
Type Female 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Application Video 

Installation Video 
Installing a 1/2" Drop-In Anchor Zinc Plated 
  1. Drill a 5/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 2" which is equal to the length of the anchor . 
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  4. Insert the anchor into the hole with the open threaded end facing up. 
  5. Take the correct 1/2" Drop-In Anchor Zinc Plated setting tool and insert the smaller diameter end into the threaded portion of the 1/2" Drop-In Anchor Zinc Plated.  
  6. Strike the end of the setting tool with a hammer until the anchor is fully set. 
  7. The 1/2" Drop-In Anchor Zinc Plated is now set. A 1/2" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 20 ft. lbs. 
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

Application Photos 
1/2" drop in anchor - concrete - pipe
View AllClose

Additional Information

Bit Size:
5/8"
Minimum Embedment:
2"
Thread Type:
1/2" - 13
Primary:
Concrete only
Environment:
Dry
2000 PSI Concrete - Pull-Out (lbs.) *:
2328
Type:
Female
Diameter:
1/2"
Length:
2"
Material:
Carbon Steel Zinc Plated
Box Qty:
50
Minimum Edge Distance:
3-1/8"
Minimum Fixture Hole Diameter (Hole Spotted):
1/2"
Inside Anchor Diameter-Bolt Diameter:
1/2"
Outside Anchor Diameter:
5/8"
Internal Thread Length:
13/16"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
CONFAST
View AllClose