American Made ThunderDrop®

1/2" American Made Drop-In Anchor 303 Stainless Steel, 50/Box

(No reviews yet) Write a Review
SKU:
ADIS12
UPC:
820274900079
Availability:
In Stock, Ships Today!
$450.23
Frequently bought together:

Description

Products Features 
  • STAMPED WITH "USA":  Meets most requirements of Made in America
  • SMOOTH ANCHOR BODY:  Provides excellent and consistent holding values in concrete
  • INTERNAL NATIONAL COARSE THREADS:  Most common threads makes locating threaded rod or bolt fast and easy
  • PRECISION CUT EXPANSION END:  Provides for uniform expansion during the installation process
  • NO LIPPED ANCHOR DESIGN:  Anchor can be installed at a depth deeper than the anchor body length to provide opportunity for greater holding values
  • 303 STAINLESS STEEL:  Can be used in wet environments and will not rust over time
Products specifications 
  
Bit Size 5/8"
Box Qty 50
Minimum Embedment 2"
Primary Concrete only
Thread Type 1/2" - 13
Minimum Edge Distance 3-1/8"
Minimum Fixture Hole Diameter (In Place) 11/16"
Minimum Fixture Hole Diameter (Hole Spotted) 1/2"
Inside Anchor Diameter-Bolt Diameter 1/2"
Outside Anchor Diameter 5/8"
Internal Thread Length 13/16"
Brand Name  ThunderDrop
Maximum Torque 20 ft./lbs.
Bolt Length  Fixture Thickness + Embedment Depth
Country  American Made
2000 PSI Concrete - Pull-Out (lbs.) * 3105
Length Measurement  End to End
Diameter 1/2"
Length 2"
Material  303 Stainless Steel
Environment  Wet
Type  Female
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Application Video 

Installation Video 
Installing a 1/2" American Made Drop-In Anchor (three zero three) 303 Stainless Steel
  1. Drill a 5/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 2" which is equal to the length of the anchor .
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
  4.  
  5. Insert the anchor into the hole with the open threaded end facing up.
  6. Take the correct 1/2" American Made Drop-In Anchor (three zero three) 303 Stainless Steel setting tool and insert the smaller diameter end into the threaded portion of the 1/2" American Made Drop-In Anchor (three zero three) 303 Stainless Steel.
  7. Strike the end of the setting tool with a hammer until the anchor is fully set.
  8. The 1/2" American Made Drop-In Anchor (three zero three) 303 Stainless Steel is now set. A 1/2" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 20 ft./lbs.
  9. Always use proper personal protective equipment per manufacturer's and OSHA instructions.

View AllClose

Additional Information

Bit Size:
5/8"
Minimum Embedment:
2"
Thread Type:
1/2" - 13
Primary:
Concrete only
Environment:
Wet
2000 PSI Concrete - Pull-Out (lbs.) *:
3105
Type:
Female
Diameter:
1/2"
Length:
2"
Material:
303 Stainless Steel
Box Qty:
50
Minimum Edge Distance:
3-1/8"
Minimum Fixture Hole Diameter (Hole Spotted):
1/2"
Maximum Torque:
20 ft./lbs.
Inside Anchor Diameter-Bolt Diameter:
1/2"
Outside Anchor Diameter:
5/8"
Internal Thread Length:
13/16"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
ThunderDrop
View AllClose