American Made ThunderDrop®

1/2" American Made Drop-In Anchor Zinc Plated, 50/Box

(No reviews yet) Write a Review
SKU:
ADI12
UPC:
820274900024
Availability:
In Stock, Ships Today!
$214.39
Frequently bought together:

Description

Products Features 
  • STAMPED WITH "USA":  Meets most requirements of Made in America
  • SMOOTH ANCHOR BODY:  Provides excellent and consistent holding values in concrete
  • INTERNAL NATIONAL COARSE THREADS:  Most common threads makes locating threaded rod or bolt fast and easy
  • PRECISION CUT EXPANSION END:  Provides for uniform expansion during the installation process
  • NO LIPPED ANCHOR DESIGN:  Anchor can be installed at a depth deeper than the anchor body length to provide opportunity for greater holding values
Products specifications 
Bit Size 5/8"
Box Qty 50
Minimum Embedment 2"
Primary  Concrete only
Thread Type 1/2" - 13
Minimum Edge Distance 3-1/8"
Minimum Fixture Hole Diameter (In Place) 11/16"
Minimum Fixture Hole Diameter (Hole Spotted) 1/2"
Inside Anchor Diameter-Bolt Diameter 1/2"
Outside Anchor Diameter 5/8"
Internal Thread Length 13/16"
Brand Name  ThunderDrop
Maximum Torque 20 ft./lbs.
Bolt Length  Fixture Thickness + Embedment Depth
Country  American Made
2000 PSI Concrete - Pull-Out (lbs.) * 3105
Length Measurement End to End
Diameter 1/2"
Length 2"
Material  Carbon Steel Zinc Plated
Environment  Dry
Type  Female
Application Video 

Installation Video 
Installing a 1/2" American Made Drop-In Anchor Zinc Plated
  1. Drill a 5/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 2" which is equal to the length of the anchor .
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
  4. Insert the anchor into the hole with the open threaded end facing up.
  5. Take the correct 1/2" American Made Drop-In Anchor Zinc Plated setting tool and insert the smaller diameter end into the threaded portion of the 1/2" American Made Drop-In Anchor Zinc Plated.
  6. Strike the end of the setting tool with a hammer until the anchor is fully set.
  7. The 1/2" American Made Drop-In Anchor Zinc Plated is now set. A 1/2" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 20 ft./lbs.
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions.

View AllClose

Additional Information

Bit Size:
5/8"
Minimum Embedment:
2"
Thread Type:
1/2" - 13
Primary:
Concrete only
Environment:
Dry
2000 PSI Concrete - Pull-Out (lbs.) *:
3105
Type:
Female
Diameter:
1/2"
Length:
2"
Material:
Carbon Steel Zinc Plated
Box Qty:
50
Minimum Edge Distance:
3-1/8"
Minimum Fixture Hole Diameter (Hole Spotted):
1/2"
Maximum Torque:
20 ft./lbs.
Inside Anchor Diameter-Bolt Diameter:
1/2"
Outside Anchor Diameter:
5/8"
Internal Thread Length:
13/16"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
ThunderDrop
View AllClose