CONFAST®

1/2" Lag Shield Anchor Long, 25/Box

(No reviews yet) Write a Review

SKU:: LSL12
UPC:: 820274000670
MPN:
Availability:: In Stock, Ships Today!

$50.56

Quantity:

Description
Additional Information

Description

Products Features

EASY TO INSTALL: Fast, secure installation
EASY TO REMOVE: Simply turn clockwise and back the screw out of the hole
ONE PIECE DESIGN: No nuts or washers the anchor comes complete

Products specifications

Bit Size	3/4"
Box Qty	25
Minimum Embedment	3-1/2"
Thread Type	1/2" - 13
Minimum Edge Distance	3-3/4"
Minimum Fixture Hole Diameter (In Place)	7/8"
Minimum Fixture Hole Diameter (Hole Spotted)	1/2"
Inside Anchor Diameter-Bolt Diameter	1/2"
Outside Anchor Diameter	3/4"
Internal Thread Length	1-7/8"
Brand Name	CONFAST®
Minimum Spacing	7-1/2"
Maximum Torque	20 ft./lbs.
Bolt Length	Fixture Thickness + Embedment Depth
2000 PSI Concrete - Pull-Out (lbs.) *	1095
Length Measurement	End to End
Diameter	1/2"
Length	3-1/2"
Material	Zamac
Environment	Wet
Type	Female

* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load

Installation Video

Installing a 1/2" Lag Shield Anchor Long

Drill a 3/4" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
The depth of the hole can be deeper or equal to the minimum embedment depth of 3-1/2" which is equal to the length of the anchor .
Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
Insert the anchor in the hole with the closed end of the lag shield inserted first.
Place the fixture over the 1/2" Lag Shield Anchor Long, insert a 1/2" diameter lag screw through the fixture and into the 1/2" Lag Shield Anchor Long.
Use a wrench to turn the lag screw clockwise until tight or maximum torque value 20 ft./lbs. is reached.
Always use proper personal protective equipment per manufacturer's and OSHA instructions.

Product Video

Application Photos

1/2" lag shield long - block - hand railing

View AllClose

Additional Information

Bit Size:	3/4"
Minimum Embedment:	3-1/2"
Thread Type:	1/2" - 13
Material:	Zamac
Environment:	Wet
2000 PSI Concrete - Pull-Out (lbs.) *:	1095
Type:	Female
Diameter:	1/2"
Length:	3-1/2"
Box Qty:	25
Minimum Spacing:	7-1/2"
Minimum Edge Distance:	3-3/4"
Minimum Fixture Hole Diameter (In Place):	7/8"
Minimum Fixture Hole Diameter (Hole Spotted):	1/2"
Maximum Torque:	20 ft./lbs.
Inside Anchor Diameter-Bolt Diameter:	1/2"
Outside Anchor Diameter:	3/4"
Internal Thread Length:	1-7/8"
Length Measurement:	End to End
Bolt Length:	Fixture Thickness + Embedment Depth
Brand Name:	CONFAST