CONFAST®

1/4" x 1" Hammer Drive Anchor, 150/Box

(No reviews yet) Write a Review
SKU:
HD141-I150
UPC:
820274000595
Availability:
In Stock, Ships Today!
$30.59
Related Products:

Description

Products Features 
  • INSTALLS IN A VARIETY OF BASE MATERIALS:  Can be used in a variety of applications; job will be easier and faster 
  • MUSHROOM​ ​HEAD:  Lager bearing​ ​surface provides improved pullover characteristics 
  • ANCHOR DIAMETER IS HOLE DIAMETER:  Creates easily determined hole size for simple application process 
  • ALL SIZES PACKAGED 150 PIECES PER BOX:  Standardized quantity amount for purchase planning and usage 
  • PERMANENT​ ​FASTENING:  Once installed, fastener cannot be removed; very secure 
Products specifications 
Bit Size  1/4" 
Box Qty  150 
Minimum Embedment  3/4" 
Head Type  Mushroom 
Minimum Edge Distance  1-1/4" 
Maximum Fixture Thickness  1/4" 
Minimum Fixture Hole Diameter (In Place)  5/16" 
Minimum Fixture Hole Diameter (Hole Spotted)  5/16" 
Brand Name  CONFAST® 
Minimum Spacing  2-1/2" 
2000 PSI Concrete - Pull-Out (lbs.) *  405 
2000 PSI Concrete - Shear (lbs.) *  450 
Length Measurement  Underneath head 
Diameter  1/4" 
Length  1" 
Material  Zamac 
Environment  Dry 
Type  Male 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video 
Installing a 1/4" x 1" (one inch) Hammer Drive Anchor 
  1. Drill a 1/4" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 3/4" is met. 
  3. The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 1/4" x 1" (one inch) Hammer Drive Anchor is 5/16". 
  4. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  5. Insert the 1/4" x 1" (one inch) Hammer Drive Anchor, slit end first, through the material to be fastened and into the hole, ensuring that the bottom of the head is sitting flush with the fixture plate. 
  6. Hammer the nail flush into the head of the anchor body. 
  7. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

Application Photos 
1/4" x 1" hammer drive - concrete - conduit clip 1/4" x 1" hammer drive - brick - dock controls 1/4" x 1" hammer drive - brick - building gutter 1/4" x 1" hammer drive - block - rain gutter downspout
View AllClose

Additional Information

Bit Size:
1/4"
Minimum Embedment:
3/4"
Type:
Male
Material:
Zamac
Environment:
Dry
2000 PSI Concrete - Pull-Out (lbs.) *:
405
2000 PSI Concrete - Shear (lbs.) *:
450
Diameter:
1/4"
Length:
1"
Box Qty:
150
Minimum Spacing:
2-1/2"
Minimum Edge Distance:
1-1/4"
Maximum Fixture Thickness:
1/4"
Minimum Fixture Hole Diameter (In Place):
5/16"
Minimum Fixture Hole Diameter (Hole Spotted):
5/16"
Head Type:
Mushroom
Length Measurement:
Underneath head
Brand Name:
CONFAST
View AllClose