Simpson Strong-Tie

1/4" x 3-1/2" Simpson Strong-Tie Titen HD Countersunk Head Heavy-Duty Screw Anchor Zinc Plated - THDB25312CS, 50/Box

(No reviews yet) Write a Review
SKU:
LDTF14312;SC
UPC:
707392003175
MPN:
THDB25312CS
Availability:
In Stock, Ships Today!
$78.69
Frequently bought together:

Description

  • Code listed under IBC/IRC in accordance with ICC-ES AC193 and ACI 355.2 for cracked and uncracked concrete per ICC-ES ESR-2713 
  • Code listed under IBC/IRC in accordance with ICC-ES AC106 for masonry per ICC-ES ESR-1056 
  • Qualified for static and seismic loading conditions 
  • Thread design undercuts to efficiently transfer the load to the base material 
  • Standard fractional sizes 
  • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility 
  • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits 
  • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors 
  • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance 
  • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved 
  • Reuse of the anchor to achieve listed load values is not recommended 
  •  

Applications 
The anchor is made from Carbon Steel, and is zinc plate. This anchor is designed for use in

Environment 
The anchor is designed for use in a dry environment.

Head Style 
The anchor is a Countersunk head and is designed to prevent the head from protruding above the surface of the item being attached.

Hole Diameter/Bit Diameter 
The anchor requires a 1/4" hole to be drilled in the base material. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required 
A T30 is required for driving the anchor into the base material.

Diameter of Anchor 
The diameter of the anchor is 1/4".

Length Anchor 
The length of the anchor is 3-1/2"

Depth of Hole 
The depth of the hole that is required for the anchor should be a minimum of 1/2" deeper than the anchor will penetrate the concrete. This will allow space for dust created during the installation process to fall, which will prevent the anchor from bottoming out in the hole before full penetration into the concrete.

Fixture Hole Diameter 
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 3/8".

Torque Value 
To be set properly in the concrete, the anchor must be torqued to between See PDF

View AllClose

Additional Information

Bit Size:
1/4"
Minimum Embedment:
See PDF
Environment:
Dry
Material:
Carbon Steel
Thread Type:
Undercut Design
Type:
Male
Diameter:
1/4"
Length:
3-1/2"
Box Qty:
50
Minimum Spacing:
See PDF
Minimum Edge Distance:
See PDF
Minimum Fixture Hole Diameter (In Place):
3/8"
Minimum Fixture Hole Diameter (Hole Spotted):
3/8"
Length Measurement:
Overall length including head
Brand Name:
Simpson Strong-Tie
Concrete Application:
Cracked & Uncracked Approved
Head Type:
Countersunk Phillips
View AllClose