JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser for full functionality of this website.
 
You have no items in your shopping cart.
Free Shipping
$25 or more
               
 
 

3/4" 304 Stainless Steel Drop-In Anchor, 25/Box

$386.50 per Box of 25
    Payment types
   Availability: In Stock / Ships Today
  Questions?

SKU: DIS34
  MFG: CONFAST®

 

  • Customer Reviews
  • EV MDC SSL
    EV MDC SSL


Required To Install: 3/4" Drop-In Setting Tool, Each
Products Features
  • SMOOTH WALL DESIGN: Provides contact along​ ​length of expansion area; provides consistent holding values; aesthetic appeal
  • INTERNAL NATIONAL COARSE THREADS: Common threads create easier ​selection of threaded rod or bolt
  • IDEAL FOR FLUSH MOUNTING: Nothing​ ​protrudes above surface of the concrete once anchor is properly installed
  • MOST​ ​CONSISTENT​ ​HOLDING VALUES: Can be used in solid concrete as an internally threaded concrete fastener
  • SLOTTED BODY IS PRECISION MATCHED TO TAPERED EXPANSION PLUG: Ensures that the anchor is uniformly expanded ​to provide consistent holding​ ​value
Products specifications
Bit Size 1"
Minimum Embedment 3-3/16"
Thread Type 3/4" - 10
2000 PSI Concrete - Pull-Out (lbs.) * 5008
Type Female
Primary Concrete only
Diameter 3/4"
Length 3-3/16"
Material 304 Stainless Steel
Environment Wet
Box Qty 25
Minimum Spacing 10"
Minimum Edge Distance 5"
Minimum Fixture Hole Diameter (In Place) 1-1/8"
Minimum Fixture Hole Diameter (Hole Spotted) 3/4"
Maximum Torque 80 ft./lbs.
Inside Anchor Diameter-Bolt Diameter 3/4"
Outside Anchor Diameter 1"
Internal Thread Length 1-3/8"
Length Measurement End to End
Bolt Length Fixture Thickness + Embedment Depth
Brand Name CONFAST®
Application Video

Installation Video
Installing a 3/4" (three zero four) 304 Stainless Steel Drop-In Anchor
  1. Drill a 1" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 3-3/16" which is equal to the length of the anchor .
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
  4. Insert the anchor into the hole with the open threaded end facing up.
  5. Take the correct 3/4" (three zero four) 304 Stainless Steel Drop-In Anchor setting tool and insert the smaller diameter end into the threaded portion of the 3/4" (three zero four) 304 Stainless Steel Drop-In Anchor.
  6. Strike the end of the setting tool with a hammer until the anchor is fully set.
  7. The 3/4" (three zero four) 304 Stainless Steel Drop-In Anchor is now set. A 3/4" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 80 ft. lbs.
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions.

Application Pictures
3/4" 304 stainless steel drop in anchor - concrete -  threaded rod
Product Reviews

* The figures above indicate average ultimate tension and shear failure values. A safety factor of 4:1 or 25% of ultimate value is generally accepted as a safe working load. Reference should always be made to applicable codes.



* The bits are recommended by diameter and may not necessarily be the length needed for your application. Please make sure the usable length will work for your application. *

Questions? Comments?
Contact Us

*
*
*