CONFAST®

3/4" Drop-In Anchor Zinc Plated, 25/Box

(No reviews yet) Write a Review
SKU:
DI34
UPC:
820274000397
Availability:
In Stock, Ships Today!
$89.12

Description

Products Features 
  • SMOOTH WALL DESIGN:  Provides contact along​ ​length of expansion area; provides consistent holding values; aesthetic appeal 
  • INTERNAL NATIONAL COARSE THREADS:  Common threads create easier ​selection of threaded rod or bolt 
  • IDEAL FOR FLUSH MOUNTING: Nothing​ ​protrudes above surface of the concrete once anchor is properly installed 
  • MOST​ ​CONSISTENT​ ​HOLDING VALUES:  Can be used in solid concrete as an internally threaded concrete fastener 
  • SLOTTED BODY IS PRECISION MATCHED TO TAPERED EXPANSION PLUG:  Ensures that the anchor is uniformly expanded ​to provide consistent holding​ ​value 
Products specifications 
Bit Size 1" 
Box Qty 25 
Minimum Embedment 3-3/16" 
Primary Concrete only 
Thread Type 3/4" - 10 
Minimum Edge Distance 5" 
Minimum Fixture Hole Diameter (In Place) 1-1/8" 
Minimum Fixture Hole Diameter (Hole Spotted) 3/4" 
Inside Anchor Diameter-Bolt Diameter 3/4" 
Outside Anchor Diameter 1" 
Internal Thread Length 1-3/8" 
Brand Name CONFAST® 
Minimum Spacing 10" 
Maximum Torque 80 ft./lbs. 
Bolt Length Fixture Thickness + Embedment Depth 
2000 PSI Concrete - Pull-Out (lbs.) * 5008 
Length Measurement End to End 
Diameter 3/4" 
Length 3-3/16" 
Material Carbon Steel Zinc Plated 
Environment Dry 
Type Female 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Application Video 

Installation Video 
Installing a 3/4" Drop-In Anchor Zinc Plated 
  1. Drill a 1" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 3-3/16" which is equal to the length of the anchor . 
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  4. Insert the anchor into the hole with the open threaded end facing up. 
  5. Take the correct 3/4" Drop-In Anchor Zinc Plated setting tool and insert the smaller diameter end into the threaded portion of the 3/4" Drop-In Anchor Zinc Plated.  
  6. Strike the end of the setting tool with a hammer until the anchor is fully set. 
  7. The 3/4" Drop-In Anchor Zinc Plated is now set. A 3/4" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 80 ft. lbs. 
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

Application Photos 
3/4" drop in anchor - concrete - threaded rod
View AllClose

Additional Information

Bit Size:
1"
Minimum Embedment:
3-3/16"
Thread Type:
3/4" - 10
Primary:
Concrete only
Environment:
Dry
2000 PSI Concrete - Pull-Out (lbs.) *:
5008
Type:
Female
Diameter:
3/4"
Length:
3-3/16"
Material:
Carbon Steel Zinc Plated
Box Qty:
25
Minimum Spacing:
10"
Minimum Edge Distance:
5"
Minimum Fixture Hole Diameter (In Place):
1-1/8"
Minimum Fixture Hole Diameter (Hole Spotted):
3/4"
Inside Anchor Diameter-Bolt Diameter:
3/4"
Outside Anchor Diameter:
1"
Internal Thread Length:
1-3/8"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
CONFAST
View AllClose