CONFAST®

3/8" Machine Screw Anchor, 50/Box

(No reviews yet) Write a Review
SKU:
MS38
UPC:
820274000892
Availability:
In Stock, Ships Today!
$94.36

Description

Products Features 
  • SHALLOW EMBEDMENT​ ​OPPORTUNITIES:  Less time required to drill hole 
  • NATIONAL COARSE THREADS:  Bolts and threaded rod is most common type available 
  • INTERNAL THREADS:  Allows for multiple bolting​ ​and unbolting​ ​without affecting holding values 
  • WORKS IN MOST​ ​MASONRY MATERIAL:  Consistent holding​ ​values in wide variety of base materials 
  • RUST​ ​RESISTANT:  Can be used in applications where moisture is present; easier maintenance 
Products specifications 
Bit Size  3/4" 
Box Qty  50 
Minimum Embedment  1-1/4" 
Thread Type  3/8" - 16 
Minimum Edge Distance  3-3/4" 
Minimum Fixture Hole Diameter (In Place)  7/8" 
Minimum Fixture Hole Diameter (Hole Spotted)  3/8" 
Inside Anchor Diameter-Bolt Diameter  3/8" 
Outside Anchor Diameter  3/4" 
Internal Thread Length  1" 
Brand Name  CONFAST® 
Minimum Spacing  7-1/2" 
Maximum Torque  10 ft./lbs. 
Bolt Length  Fixture Thickness + Embedment Depth 
2000 PSI Concrete - Pull-Out (lbs.) *  1488 
Length Measurement  End to End 
Diameter  3/8" 
Length  1-1/4" 
Material  Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy 
Environment  Moist 
Type  Female 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video 
Installing a 3/8" Machine Screw Anchor 
  1. Drill a 3/4" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 1-1/4" which is equal to the length of the anchor . 
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  4. Insert the anchor into the hole with the threaded cone end first. 
  5. Take the correct 3/8" Machine Screw Anchor setting tool and insert the smaller diameter end into the open end of the 3/8" Machine Screw Anchor.  
  6. Strike the end of the setting tool with a hammer until the anchor is fully set. 
  7. The 3/8" Machine Screw Anchor is now set. A 3/8" diameter bolt can be inserted into the 3/8" Machine Screw Anchor with a maximum torque of 10 ft. lbs. 
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

Application Photos 
3/8" machine screw anchor - brick - surveillance camera 3/8" machine screw anchor - brick - railing 3/8" machine screw anchor - block - electric meter 3/8" machine screw anchor - block - shower partition
View AllClose

Additional Information

Bit Size:
3/4"
Minimum Embedment:
1-1/4"
Thread Type:
3/8" - 16
Material:
Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy
Environment:
Moist
2000 PSI Concrete - Pull-Out (lbs.) *:
1488
Type:
Female
Diameter:
3/8"
Length:
1-1/4"
Box Qty:
50
Minimum Spacing:
7-1/2"
Minimum Edge Distance:
3-3/4"
Minimum Fixture Hole Diameter (In Place):
7/8"
Minimum Fixture Hole Diameter (Hole Spotted):
3/8"
Inside Anchor Diameter-Bolt Diameter:
3/8"
Outside Anchor Diameter:
3/4"
Internal Thread Length:
1"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
CONFAST
View AllClose

Related Products

Related Products

Picture of 3/4" x 6" Hammer Bit, Each
Add to Cart
Quick view

3/4" x 6" Hammer Bit, Each

TruCut®

$31.99
Products Features TRICARB® CARBIDE:  Guarantees longer bit life and speedier penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN:  Faster dust removal allows...
Picture of 3/4" x 6-3/4" SDS Bit, Each
Add to Cart
Quick view

3/4" x 6-3/4" SDS Bit, Each

TruCut®

$52.31
Products Features TRICARB® CARBIDE:  Longer bit life and quick penetration due to increased chiseling action THUNDERTWIST® FLUTE DESIGN:  Faster dust removal provides faster...