CONFAST®
3/8" Machine Screw Anchor, 50/Box
- SKU:
- MS38
- UPC:
- 820274000892
- Availability:
- In Stock, Ships Today!
Description
Products Features
- SHALLOW EMBEDMENT OPPORTUNITIES: Less time required to drill hole
- NATIONAL COARSE THREADS: Bolts and threaded rod is most common type available
- INTERNAL THREADS: Allows for multiple bolting and unbolting without affecting holding values
- WORKS IN MOST MASONRY MATERIAL: Consistent holding values in wide variety of base materials
- RUST RESISTANT: Can be used in applications where moisture is present; easier maintenance
Products specifications
Bit Size | 3/4" |
Box Qty | 50 |
Minimum Embedment | 1-1/4" |
Thread Type | 3/8" - 16 |
Minimum Edge Distance | 3-3/4" |
Minimum Fixture Hole Diameter (In Place) | 7/8" |
Minimum Fixture Hole Diameter (Hole Spotted) | 3/8" |
Inside Anchor Diameter-Bolt Diameter | 3/8" |
Outside Anchor Diameter | 3/4" |
Internal Thread Length | 1" |
Brand Name | CONFAST® |
Minimum Spacing | 7-1/2" |
Maximum Torque | 10 ft./lbs. |
Bolt Length | Fixture Thickness + Embedment Depth |
2000 PSI Concrete - Pull-Out (lbs.) * | 1488 |
Length Measurement | End to End |
Diameter | 3/8" |
Length | 1-1/4" |
Material | Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy |
Environment | Moist |
Type | Female |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video
Installing a 3/8" Machine Screw Anchor
- Drill a 3/4" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
- The depth of the hole can be deeper or equal to the minimum embedment depth of 1-1/4" which is equal to the length of the anchor .
- Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
- Insert the anchor into the hole with the threaded cone end first.
- Take the correct 3/8" Machine Screw Anchor setting tool and insert the smaller diameter end into the open end of the 3/8" Machine Screw Anchor.
- Strike the end of the setting tool with a hammer until the anchor is fully set.
- The 3/8" Machine Screw Anchor is now set. A 3/8" diameter bolt can be inserted into the 3/8" Machine Screw Anchor with a maximum torque of 10 ft. lbs.
- Always use proper personal protective equipment per manufacturer's and OSHA instructions.
Application Photos
Additional Information
Bit Size: |
3/4" |
Minimum Embedment: |
1-1/4" |
Thread Type: |
3/8" - 16 |
Material: |
Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy |
Environment: |
Moist |
2000 PSI Concrete - Pull-Out (lbs.) *: |
1488 |
Type: |
Female |
Diameter: |
3/8" |
Length: |
1-1/4" |
Box Qty: |
50 |
Minimum Spacing: |
7-1/2" |
Minimum Edge Distance: |
3-3/4" |
Minimum Fixture Hole Diameter (In Place): |
7/8" |
Minimum Fixture Hole Diameter (Hole Spotted): |
3/8" |
Inside Anchor Diameter-Bolt Diameter: |
3/8" |
Outside Anchor Diameter: |
3/4" |
Internal Thread Length: |
1" |
Length Measurement: |
End to End |
Bolt Length: |
Fixture Thickness + Embedment Depth |
Brand Name: |
CONFAST |