Simpson Strong-Tie

5/8" x 5" Simpson Strong-Tie Titen HD Screw Anchor 316 Stainless Steel - THDB62500H6SS, 10/Box

(No reviews yet) Write a Review
SKU:
LDTS316585;SC
UPC:
707392373667
MPN:
THDB62500H6SS
Availability:
In Stock, Ships Today!
$257.28
Frequently bought together:

Description

  • Code listed under IBC/IRC in accordance with ICC-ES AC193 and ACI 355.2 for cracked and uncracked concrete per ICC-ES ESR-2713 
  • Code listed under IBC/IRC in accordance with ICC-ES AC106 for masonry per ICC-ES ESR-1056 
  • Qualified for static and seismic loading conditions 
  • Thread design undercuts to efficiently transfer the load to the base material 
  • Standard fractional sizes 
  • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility 
  • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits 
  • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors 
  • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance 
  • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved 
  • Reuse of the anchor to achieve listed load values is not recommended 

Applications 
The anchor is made from 316 Stainless Steel, and is 316 Stainless Steel. This anchor is designed for use in

Environment 
The anchor is designed for use in a submerged/chemicals environment.

Head Style 
The anchor is a Hex Washer Serrated head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter 
The anchor requires a 5/8" hole to be drilled in the base material (). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required 
A 15/16" is required for driving the anchor into the base material.

Diameter of Anchor 
The diameter of the anchor is 5/8".

Length Anchor 
The length of the anchor is 5"

Packaging 
The anchor is packaged with 10 pieces per box .

Depth of Hole 
The depth of the hole that is required for the anchor should be a minimum of 1/2" deeper than the anchor will penetrate the concrete. This will allow space for dust created during the installation process to fall, which will prevent the anchor from bottoming out in the hole before full penetration into the concrete.

Fixture Hole Diameter 
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 5/8" diameter anchor requires the hole in the fixture to be 3/4".

Wrench Size 
The size of the wrench required to turn the nut to set the anchor is 15/16".

Torque Value 
To be set properly in the concrete, the anchor must be torqued to between See PDF

Products specifications 
Bit Size 5/32" 
Minimum Embedment 2" 
Environment Submerged/Chemicals 
Material 316 Stainless Steel 
Thread Type Undercut Design 
2000 PSI Concrete - Pull-Out (lbs.) * 3580 
2000 PSI Concrete - Shear (lbs.) * 2108 
Type Male 
Diameter 1/2" 
Length 3" 
Box Qty 25 
Minimum Spacing 8" 
Minimum Edge Distance 5" 
Maximum Fixture Thickness 1" 
Minimum Fixture Hole Diameter (In Place) 9/16" 
Minimum Fixture Hole Diameter (Hole Spotted) 9/16" 
Length ID Code 
Wrench Size For Nut 3/4" 
Head Type Hex Washer Serrated 
Length Measurement Underneath head 
Driver Size 3/4" 
Brand Name Simpson Strong-Tie 
Product Type Concrete Screw 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
View AllClose

Additional Information

Bit Size:
5/8"
Minimum Embedment:
2"
Environment:
Submerged/Chemicals
Material:
316 Stainless Steel
Thread Type:
Undercut Design
2000 PSI Concrete - Pull-Out (lbs.) *:
3580
2000 PSI Concrete - Shear (lbs.) *:
2108
Type:
Male
Diameter:
5/8"
Length:
5"
Box Qty:
25
Minimum Spacing:
8"
Minimum Edge Distance:
5"
Maximum Fixture Thickness:
3"
Minimum Fixture Hole Diameter (In Place):
9/16"
Minimum Fixture Hole Diameter (Hole Spotted):
9/16"
Length ID Code:
H
Wrench Size For Nut:
3/4"
Head Type:
Hex Washer Serrated
Length Measurement:
Underneath head
Driver Size:
3/4"
Brand Name:
Simpson Strong-Tie
View AllClose