CONFAST®

#8 -32 Machine Screw Anchor, 100/Box

(No reviews yet) Write a Review
SKU:
MS8
UPC:
820274000922
Availability:
Contact us for information, see page for alternatives.
$36.70

OUT OF STOCK

Description

Products Features 
  • SHALLOW EMBEDMENT​ ​OPPORTUNITIES:  Less time required to drill hole 
  • NATIONAL COARSE THREADS:  Bolts and threaded rod is most common type available 
  • INTERNAL THREADS:  Allows for multiple bolting​ ​and unbolting​ ​without affecting holding values 
  • WORKS IN MOST​ ​MASONRY MATERIAL:  Consistent holding​ ​values in wide variety of base materials 
  • RUST​ ​RESISTANT:  Can be used in applications where moisture is present; easier maintenance 
Products specifications 
Bit Size 5/16" 
Box Qty 100 
Minimum Embedment 1/2" 
Minimum Edge Distance 1-9/16" 
Minimum Fixture Hole Diameter (In Place) 3/8" 
Minimum Fixture Hole Diameter (Hole Spotted) #8 
Inside Anchor Diameter-Bolt Diameter #8 
Outside Anchor Diameter 5/16" 
Internal Thread Length 13/32" 
Brand Name CONFAST® 
Bolt Length Fixture Thickness + Embedment Depth 
2000 PSI Concrete - Pull-Out (lbs.) * 251 
Length Measurement End to End 
Diameter #8 
Length 1/2" 
Material Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy 
Environment Moist 
Type Female 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video 
Installing a #8 -32 Machine Screw Anchor 
  1. Drill a 5/16" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 1/2" which is equal to the length of the anchor . 
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  4. Insert the anchor into the hole with the threaded cone end first. 
  5. Take the correct #8 -32 Machine Screw Anchor setting tool and insert the smaller diameter end into the open end of the #8 -32 Machine Screw Anchor.  
  6. Strike the end of the setting tool with a hammer until the anchor is fully set. 
  7. The #8 -32 Machine Screw Anchor is now set. A #8 diameter bolt can be inserted into the #8 -32 Machine Screw Anchor with a maximum torque of 15 in. lbs. 
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

View AllClose

Additional Information

Bit Size:
5/16"
Minimum Embedment:
1/2"
Material:
Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy
Environment:
Moist
2000 PSI Concrete - Pull-Out (lbs.) *:
251
Type:
Female
Diameter:
#8
Length:
1/2"
Box Qty:
100
Minimum Edge Distance:
1-9/16"
Minimum Fixture Hole Diameter (In Place):
3/8"
Minimum Fixture Hole Diameter (Hole Spotted):
#8
Maximum Torque:
15 in. lbs.
Inside Anchor Diameter-Bolt Diameter:
#8
Outside Anchor Diameter:
5/16"
Internal Thread Length:
13/32"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
CONFAST
View AllClose