ITW/Buildex®

Sammys® 3/8" Horizontal Threaded Rod Anchor for Steel, 3/8" - 16 Rod Size, 1/4"-14 x 1" Screw Size - SWD - 8050957, 25/Box

(No reviews yet) Write a Review
SKU:
SYSWD10
MPN:
8050957
Availability:
In Stock, Ships Today!
$98.80

Description

  • Saves time from traditional methods. 
  • Reduces installation costs. 
  • Quick to install using the Sammys Nut Driver. 
Products Specifications 
Substrate Steel 
Mount Style Horizontal 
Rod Size 3/8"-16 
Drive Sammys® #14 SW (Red) Nut Driver (8114910) 
Diameter 0.25 
Substrate Fastener Size 1/4"-14 x 1" 
Length 
  1. Insert the appropriate nut driver into a 3/8” or 1/2” portable drill. 
  2. Insert the SAMMYS into the #14SW (red) nut driver (p/n 8114910). With drill unit in a horizontal position and at a right angle to the structural member, begin installation. 
  3. When the nut driver spins freely on the SAMMYS, stop the drill and remove. 
  4. The unit is now ready to receive 1/4”, 3/8”, M10, M8 or metric all thread rod or bolt stock. 

Note: When installing SWDR, follow the above instructions, then add retainer nut and torque to 20 inch lbs. for maximum pullout in purlin steel. 

SPECIAL NUT DRIVER SYSTEM: The nut drivers were designed with a unique spin-off feature which provides a fast and safe installation each time. When the face of the driver comes into contact with the material you are installing into, continue drilling until nut driver spins free. Installation is then complete. Warranty requires the use of the appropriate nut driver for installations.

View AllClose

Additional Information

Substrate:
Steel
Mount Style:
Horizontal
Rod Size:
3/8"-16
Drive:
Sammys® #14 SW (Red) Nut Driver (8114910)
Diameter:
0.25
Substrate Fastener Size:
1/4"-14 x 1"
Length:
1
Box Qty:
25
View AllClose