ITW/Buildex®

Sammys® 3/8" Vertical Threaded Rod Anchor for Concrete, 3/8" - 16 Rod Size, 5/16" x 1-3/4" Screw Size - CST 20 SS - 8145925, 25/Box

(No reviews yet) Write a Review
SKU:
SYCST20SS
MPN:
8145925
Availability:
Discontinued by manufacturer
$148.74

OUT OF STOCK

Description

  • Saves time from traditional methods. 
  • Reduces installation costs. 
  • Quick to install using the Sammys Nut Driver. 
Products Specifications 
Drive Sammys® #14 (Black) Nut Driver (8113910) 
Mount Style Vertical 
Substrate Concrete 
Rod Size 3/8"-16 
Substrate Fastener Size 5/16" x 1-3/4" 
Diameter 0.3125 
Length 1.75 
  1. Using an SDS 250 carbide tip bit or a HEX RECEIVER with a #250 carbide tip bit, pre-drill the concrete member to a depth of 2” with a hammer/rotary hammer drill set on impact mode. 
  2. After pre-drilling has been completed, install the SLEEVE TOOL over the bit (the bit should remain in the drill), and insert the #14 (black) nut driver (p/n 8113910) into the opposite end (see Vertical Installation note above). 
  3. Insert the CST screw into the nut driver. 
  4. Place tip of screw into the pre-drilled hole, turn impact/drill unit to drill mode and begin insertion. When the nut driver spins freely on the CST screw, installation is complete. Stop and remove drill. 
  5. The concrete screw is ready to receive 1/4”, 3/8”, 1/2”, or metric all thread rod or bolt stock. (#14SW red nut driver used with 1/2” screw) 

Note: Use a 1200 maximum RPM drill for installation.

Note: Do not install concrete screws while the drill unit is in impact mode — doing so will destroy the pullout factor of the screw. 

SPECIAL NUT DRIVER SYSTEM: The nut drivers were designed with a unique spin-off feature which provides a fast and safe installation each time. When the face of the driver comes into contact with the material you are installing into, continue drilling until nut driver spins free. Installation is then complete. Warranty requires the use of the appropriate nut driver for installations.

View AllClose

Additional Information

Drive:
Sammys® #14 (Black) Nut Driver (8113910)
Mount Style:
Vertical
Substrate:
Concrete
Rod Size:
3/8"-16
Substrate Fastener Size:
5/16" x 1-3/4"
Diameter:
0.3125
Length:
1.75
Box Qty:
25
View AllClose