ITW/Buildex®

Sammys® 3/8" Vertical Threaded Rod Anchor for Steel, 3/8"-16 Rod Size, 1/4"-14 x 1" Screw Size - DST 10 - 8040957, 25/Box

(No reviews yet) Write a Review
SKU:
SYDST10
MPN:
8040957
Availability:
In Stock, Ships Today!
$76.60

Description

  • Saves time from traditional methods. 
  • Reduces installation costs. 
  • Quick to install using the Sammys Nut Driver. 
Products Specifications 
Mount Style  Vertical 
Substrate  Steel 
Rod Size  3/8"-16 
Drive  Sammys® #14 (Black) Nut Driver (8113910) 
Diameter  0.25 
Substrate Fastener Size  1/4"-14 x 1" 
Length 
  1. Insert the appropriate nut driver into a 3/8” or 1/2” portable drill. 
  2. Insert the SAMMYS® into the #14 (black) nut driver (p/n 8113910). Drill should be in a vertical position. 
  3. Push the face of the nut driver tight to the member. Begin installation when the nut driver spins freely on the SAMMYS, stop drill and remove. 
  4. The SAMMYS is now ready to receive 1/4”, 3/8”, 1/2” or metric all thread rod, bolt stock. (The 1/2” requires the #14SW red nut driver) 

Note: When installing DSTR, follow the above instructions, then add retainer nut and torque to 20 inch lbs. for maximum pullout in purlin steel. 

SPECIAL NUT DRIVER SYSTEM: The nut drivers were designed with a unique spin-off feature which provides a fast and safe installation each time. When the face of the driver comes into contact with the material you are installing into, continue drilling until nut driver spins free. Installation is then complete. Warranty requires the use of the appropriate nut driver for installations.

View AllClose

Additional Information

Mount Style:
Vertical
Substrate:
Steel
Rod Size:
3/8"-16
Drive:
Sammys® #14 (Black) Nut Driver (8113910)
Diameter:
0.25
Substrate Fastener Size:
1/4"-14 x 1"
Length:
1
Box Qty:
25
View AllClose