3/8" X 5" Hex Tapcon+ Blue Climaseal ® Build America, Buy America (BABA) ICC-ESR-3699 TCPC-3850

Applications
The anchor is made from . This anchor is designed for use in

Environment
The anchor is designed for use in a dry environment.

Head Style
The anchor is a Hex Head head

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 5"

Depth of Hole
The depth of the hole that is required for the anchor should be a minimum of 1/2" deeper than the anchor will penetrate the concrete. This will allow space for dust created during the installation process to fall, which will prevent the anchor from bottoming out in the hole before full penetration into the concrete.

1. Drill a 3/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
2. Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 1" is met.
3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
4. Insert the point of the 3/8" X 5" Hex Tapcon+ Blue Climaseal ® Build America, Buy America (BABA) ICC-ESR-3699 (ea) TCPC-3850 into the hole.
5. Turn the screw clockwise, applying slight pressure until the head of the screw is snug against the material being fastened.
6. Always use proper personal protective equipment per manufacturer's and OSHA instructions.

BABA Data

Technical Data