ITW/Buildex®

1/4" x 2-1/4" Tapcon Flat Phillips 410 Stainless Steel Silver Climaseal® Coated SPF4-214, 100/Box

(No reviews yet) Write a Review
SKU:
TCFS14214
UPC:
092097909533
MPN:
SPF4-214
Availability:
In Stock, Ships Today!
$95.82
Frequently bought together:

Description

Products Features 
  • LOWER ​INSTALLATION ​TORQUE:  Fast ​easy ​installation; ​saves ​time 
  • HIGHER ​HOLDING ​VALUES:  Higher ​quality ​installation; ​optimal ​holding strength 
  • CLIMASEAL® ​COATING:  Provides ​long-​lasting ​rust ​resistance exterior 
  • AMERICAN ​MADE:  A high-quality ​domestic ​product 
Products specifications 
Bit Size 3/16" 
Box Qty 100 
Minimum Embedment 1" 
Thread Type Hi-Lo 
Minimum Edge Distance 3" 
Maximum Fixture Thickness 1-1/4" 
Minimum Fixture Hole Diameter (In Place) 5/16" 
Minimum Fixture Hole Diameter (Hole Spotted) 5/16" 
Brand Name ITW/Buildex 
Driver Size #3 
Minimum Spacing 4" 
Thread Length 1-3/4" 
2000 PSI Concrete - Pull-Out (lbs.) * 750 
2000 PSI Concrete - Shear (lbs.) * 900 
Length Measurement Overall length including head 
Diameter 1/4" 
Length 2-1/4" 
Material 410 Stainless Steel Silver Climaseal® Coated 
Environment Moist 
Type Male 
Application Video 

Installation Video 
Installing a 1/4" x 2-1/4" 410 Stainless Steel Flat Phillips Tapcon® 
  1. Drill a 3/16" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 1" is met. 
  3. The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 1/4" x 2-1/4" 410 Stainless Steel Flat Phillips Tapcon® is 5/16". 
  4. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  5. Insert the point of the 1/4" x 2-1/4" 410 Stainless Steel Flat Phillips Tapcon® into the hole. Make sure that the screw being installed will penetrate the base material a minimum of 1" but no deeper than 1-3/4". 
  6. Using a #3 bit tip Phillips bit tip for the anchor , turn the screw clockwise, applying slight pressure until the head of the screw is snug against the material being fastened. 
  7. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

View AllClose

Additional Information

Bit Size:
3/16"
Minimum Embedment:
1"
Thread Length:
1-3/4"
Environment:
Moist
Material:
410 Stainless Steel Silver Climaseal® Coated
Thread Type:
Hi-Lo
2000 PSI Concrete - Pull-Out (lbs.) *:
750
2000 PSI Concrete - Shear (lbs.) *:
900
Type:
Male
Diameter:
1/4"
Length:
2-1/4"
Box Qty:
100
Minimum Spacing:
4"
Minimum Edge Distance:
3"
Maximum Fixture Thickness:
1-1/4"
Minimum Fixture Hole Diameter (In Place):
5/16"
Minimum Fixture Hole Diameter (Hole Spotted):
5/16"
Length Measurement:
Overall length including head
Driver Size:
#3
Brand Name:
ITW/Buildex
View AllClose