CONFAST®

3/16" x 7/8" Hammer Drive Anchor, 100/Box

(No reviews yet) Write a Review
SKU:
HD31678
UPC:
820274000663
Availability:
In Stock, Ships Today!
$18.46

Description

Products Features 
  • INSTALLS IN A VARIETY OF BASE MATERIALS:  Can be used in a variety of applications; job will be easier and faster 
  • MUSHROOM​ ​HEAD:  Lager bearing​ ​surface provides improved pullover characteristics 
  • ANCHOR DIAMETER IS HOLE DIAMETER:  Creates easily determined hole size for simple application process 
  • ALL SIZES PACKAGED 100 PIECES PER BOX:  Standardized quantity amount for purchase planning and usage 
  • PERMANENT​ ​FASTENING:  Once installed, fastener cannot be removed; very secure 
Products specifications 
Bit Size 3/16" 
Box Qty 100 
Minimum Embedment 3/4" 
Head Type Mushroom 
Minimum Edge Distance 15/16" 
Maximum Fixture Thickness 1/8" 
Minimum Fixture Hole Diameter (In Place) 1/4" 
Minimum Fixture Hole Diameter (Hole Spotted) 1/4" 
Brand Name CONFAST® 
Minimum Spacing 1-7/8" 
2000 PSI Concrete - Pull-Out (lbs.) * 214 
2000 PSI Concrete - Shear (lbs.) * 311 
Length Measurement Underneath head 
Diameter 3/16" 
Length 7/8" 
Material Zamac 
Environment Dry 
Type Male 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Installation Video 
Installing a 3/16" x 7/8" Hammer Drive Anchor 
  1. Drill a 3/16" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. Drill the hole a 1/2" deeper than the anchor will penetrate the concrete, making sure the minimum embedment requirements of 3/4" is met. 
  3. The hole can be drilled while the fixture is in place. The minimum hole in the fixture for the 3/16" x 7/8" Hammer Drive Anchor is 1/4". 
  4. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  5. Insert the 3/16" x 7/8" Hammer Drive Anchor, slit end first, through the material to be fastened and into the hole, ensuring that the bottom of the head is sitting flush with the fixture plate. 
  6. Hammer the nail flush into the head of the anchor body. 
  7. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

Application Photos 
3/16" x 7/8" hammer drive - brick - conduit strap 1/4" x 7/8 hammer drive - brick - downspout 1/4" x 7/8 hammer drive - brick -building water pipe 1/4" x 7/8 hammer drive - block -conduit
View AllClose

Additional Information

Bit Size:
3/16"
Minimum Embedment:
3/4"
Type:
Male
Material:
Zamac
Environment:
Dry
2000 PSI Concrete - Pull-Out (lbs.) *:
214
2000 PSI Concrete - Shear (lbs.) *:
311
Diameter:
3/16"
Length:
7/8"
Box Qty:
100
Minimum Spacing:
1-7/8"
Minimum Edge Distance:
15/16"
Maximum Fixture Thickness:
1/8"
Minimum Fixture Hole Diameter (In Place):
1/4"
Minimum Fixture Hole Diameter (Hole Spotted):
1/4"
Head Type:
Mushroom
Length Measurement:
Underneath head
Brand Name:
CONFAST
View AllClose