American Made ThunderDrop®

3/8" American Made Drop-In Anchor 303 Stainless Steel, 100/Box

(No reviews yet) Write a Review
SKU:
ADIS38
UPC:
820274900062
Availability:
In Stock, Ships Today!
$552.76
Frequently bought together:

Description

Products Features 
  • STAMPED WITH "USA":  Meets most requirements of Made in America
  • SMOOTH ANCHOR BODY:  Provides excellent and consistent holding values in concrete
  • INTERNAL NATIONAL COARSE THREADS:  Most common threads makes locating threaded rod or bolt fast and easy
  • PRECISION CUT EXPANSION END:  Provides for uniform expansion during the installation process
  • NO LIPPED ANCHOR DESIGN:  Anchor can be installed at a depth deeper than the anchor body length to provide opportunity for greater holding values
  • 303 STAINLESS STEEL:  Can be used in wet environments and will not rust over time
Products specifications 
Bit Size 1/2"
Box Qty 100
Minimum Embedment 1-9/16"
Primary  Concrete only
Thread Type 3/8" - 16
Minimum Edge Distance 2-1/2"
Minimum Fixture Hole Diameter (In Place) 9/16"
Minimum Fixture Hole Diameter (Hole Spotted) 3/8"
Inside Anchor Diameter-Bolt Diameter 3/8"
Outside Anchor Diameter 1/2"
Internal Thread Length 5/8"
Brand Name  ThunderDrop
Minimum Spacing 5"
Maximum Torque 10 ft./lbs.
Bolt Length  Fixture Thickness + Embedment Depth
Country  American Made
Thread Length 5/8"
2000 PSI Concrete - Pull-Out (lbs.) * 1560
Length Measurement  End to End
Diameter 3/8"
Length 1-9/16"
Material  303 Stainless Steel
Environment  Wet
Type  Female
Application Video 

Installation Video 
Installing a 3/8" American Made Drop-In Anchor (three zero three) 303 Stainless Steel
  1. Drill a 1/2" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 1-9/16" which is equal to the length of the anchor .
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
  4. Insert the anchor into the hole with the open threaded end facing up.
  5. Take the correct 3/8" American Made Drop-In Anchor (three zero three) 303 Stainless Steel setting tool and insert the smaller diameter end into the threaded portion of the 3/8" American Made Drop-In Anchor (three zero three) 303 Stainless Steel.
  6. Strike the end of the setting tool with a hammer until the anchor is fully set.
  7. The 3/8" American Made Drop-In Anchor (three zero three) 303 Stainless Steel is now set. A 3/8" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 10 ft./lbs.
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions.

Application Photos 
3/8" 304 stainless steel drop in anchor - concrete - stair railing
View AllClose

Additional Information

Bit Size:
1/2"
Minimum Embedment:
1-9/16"
Thread Type:
3/8" - 16
Primary:
Concrete only
Environment:
Wet
Thread Length:
5/8"
2000 PSI Concrete - Pull-Out (lbs.) *:
1560
Type:
Female
Diameter:
3/8"
Length:
1-9/16"
Material:
303 Stainless Steel
Box Qty:
100
Minimum Spacing:
5"
Minimum Edge Distance:
2-1/2"
Minimum Fixture Hole Diameter (In Place):
9/16"
Minimum Fixture Hole Diameter (Hole Spotted):
3/8"
Maximum Torque:
10 ft./lbs.
Inside Anchor Diameter-Bolt Diameter:
3/8"
Outside Anchor Diameter:
1/2"
Internal Thread Length:
5/8"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
ThunderDrop
View AllClose