CONFAST®

5/16" Lag Shield Anchor Long, 100/Box

(No reviews yet) Write a Review

SKU:: LSL516
UPC:: 820274000700
MPN:
Availability:: In Stock / Ships Today

Picture of 5/16" Lag Shield Anchor Long, 100/Box

$87.04

Current Stock:

Quantity:

Description
Additional Information

Description

Products Features

EASY TO INSTALL: Fast, secure installation
EASY TO REMOVE: Simply turn clockwise and back the screw out of the hole
ONE PIECE DESIGN: No nuts or washers the anchor comes complete

Products specifications

Bit Size	1/2"
Box Qty	100
Minimum Embedment	1-3/4"
Thread Type	5/16" - 9
Minimum Edge Distance	2-1/2"
Minimum Fixture Hole Diameter (In Place)	5/8"
Minimum Fixture Hole Diameter (Hole Spotted)	5/16"
Inside Anchor Diameter-Bolt Diameter	5/16"
Outside Anchor Diameter	1/2"
Internal Thread Length	1"
Brand Name	CONFAST®
Minimum Spacing	5"
Bolt Length	Fixture Thickness + Embedment Depth
2000 PSI Concrete - Pull-Out (lbs.) *	281
Length Measurement	End to End
Diameter	5/16"
Length	1-3/4"
Material	Zamac
Environment	Wet
Type	Female

* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load

Installation Video

Installing a 5/16" Lag Shield Anchor Long

Drill a 1/2" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
The depth of the hole can be deeper or equal to the minimum embedment depth of 1-3/4" which is equal to the length of the anchor .
Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
Insert the anchor in the hole with the closed end of the lag shield inserted first.
Place the fixture over the 5/16" Lag Shield Anchor Long, insert a 5/16" diameter lag screw through the fixture and into the 5/16" Lag Shield Anchor Long.
Use a wrench to turn the lag screw clockwise until tight or maximum torque value 7ft./lbs. is reached.
Always use proper personal protective equipment per manufacturer's and OSHA instructions.

Product Video

Application Photos

View AllClose

Additional Information

Bit Size:	1/2"
Minimum Embedment:	1-3/4"
Thread Type:	5/16" - 9
Material:	Zamac
Environment:	Wet
2000 PSI Concrete - Pull-Out (lbs.) *:	281
Type:	Female
Diameter:	5/16"
Length:	1-3/4"
Box Qty:	100
Minimum Spacing:	5"
Minimum Edge Distance:	2-1/2"
Minimum Fixture Hole Diameter (In Place):	5/8"
Minimum Fixture Hole Diameter (Hole Spotted):	5/16"
Inside Anchor Diameter-Bolt Diameter:	5/16"
Outside Anchor Diameter:	1/2"
Internal Thread Length:	1"
Length Measurement:	End to End
Bolt Length:	Fixture Thickness + Embedment Depth
Brand Name:	CONFAST

View AllClose

We're currently collecting product reviews for this item. In the meantime, here are some reviews from our past customers sharing their overall shopping experience.

4.9

Out of 5.0