CONFAST®
5/8" 316 Stainless Steel Drop-In Anchor, 25/Box
- SKU:
- DIS31658
- UPC:
- 820274000502
- Availability:
- In Stock, Ships Today!
Description
Products Features
- SMOOTH WALL DESIGN: Provides contact along length of expansion area; provides consistent holding values; aesthetic appeal
- INTERNAL NATIONAL COARSE THREADS: Common threads create easier selection of threaded rod or bolt
- IDEAL FOR FLUSH MOUNTING: Nothing protrudes above surface of the concrete once anchor is properly installed
- MOST CONSISTENT HOLDING VALUES: Can be used in solid concrete as an internally threaded concrete fastener
- SLOTTED BODY IS PRECISION MATCHED TO TAPERED EXPANSION PLUG: Ensures that the anchor is uniformly expanded to provide consistent holding value
Products specifications
Bit Size | 7/8" |
Box Qty | 25 |
Minimum Embedment | 2-1/2" |
Primary | Concrete only |
Minimum Edge Distance | 4-3/8" |
Minimum Fixture Hole Diameter (In Place) | 1" |
Minimum Fixture Hole Diameter (Hole Spotted) | 5/8" |
Inside Anchor Diameter-Bolt Diameter | 5/8" |
Outside Anchor Diameter | 7/8" |
Internal Thread Length | 1-3/16" |
Brand Name | CONFAST® |
Minimum Spacing | 8-3/4" |
Maximum Torque | 40 ft./lbs. |
Bolt Length | Fixture Thickness + Embedment Depth |
2000 PSI Concrete - Pull-Out (lbs.) * | 2492 |
Length Measurement | End to End |
Diameter | 5/8" |
Length | 2-1/2" |
Material | 316 Stainless Steel |
Environment | Submerged/Chemicals |
Type | Female |
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Application Video
Installation Video
Installing a 5/8" (three one six) 316 Stainless Steel Drop-In Anchor - Drill a 7/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15.
- The depth of the hole can be deeper or equal to the minimum embedment depth of 2-1/2" which is equal to the length of the anchor .
- Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb.
- Insert the anchor into the hole with the open threaded end facing up.
- Take the correct 5/8" (three one six) 316 Stainless Steel Drop-In Anchor setting tool and insert the smaller diameter end into the threaded portion of the 5/8" (three one six) 316 Stainless Steel Drop-In Anchor.
- Strike the end of the setting tool with a hammer until the anchor is fully set.
- The 5/8" (three one six) 316 Stainless Steel Drop-In Anchor is now set. A 5/8" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 40 ft. lbs.
- Always use proper personal protective equipment per manufacturer's and OSHA instructions.
Additional Information
Bit Size: |
7/8" |
Minimum Embedment: |
2-1/2" |
Type: |
Female |
Primary: |
Concrete only |
Environment: |
Submerged/Chemicals |
2000 PSI Concrete - Pull-Out (lbs.) *: |
2492 |
Diameter: |
5/8" |
Length: |
2-1/2" |
Material: |
316 Stainless Steel |
Box Qty: |
25 |
Minimum Spacing: |
8-3/4" |
Minimum Edge Distance: |
4-3/8" |
Minimum Fixture Hole Diameter (In Place): |
1" |
Minimum Fixture Hole Diameter (Hole Spotted): |
5/8" |
Inside Anchor Diameter-Bolt Diameter: |
5/8" |
Outside Anchor Diameter: |
7/8" |
Internal Thread Length: |
1-3/16" |
Length Measurement: |
End to End |
Bolt Length: |
Fixture Thickness + Embedment Depth |
Brand Name: |
CONFAST |