CONFAST®

5/8" Drop-In Anchor Zinc Plated, 25/Box

(No reviews yet) Write a Review
SKU:
DI58
UPC:
820274000410
Availability:
In Stock, Ships Today!
$41.40

Description

Products Features 
  • SMOOTH WALL DESIGN:  Provides contact along​ ​length of expansion area; provides consistent holding values; aesthetic appeal 
  • INTERNAL NATIONAL COARSE THREADS:  Common threads create easier ​selection of threaded rod or bolt 
  • IDEAL FOR FLUSH MOUNTING: Nothing​ ​protrudes above surface of the concrete once anchor is properly installed 
  • MOST​ ​CONSISTENT​ ​HOLDING VALUES:  Can be used in solid concrete as an internally threaded concrete fastener 
  • SLOTTED BODY IS PRECISION MATCHED TO TAPERED EXPANSION PLUG:  Ensures that the anchor is uniformly expanded ​to provide consistent holding​ ​value 
Products specifications 
Bit Size 7/8" 
Box Qty 25 
Minimum Embedment 2-1/2" 
Primary Concrete only 
Minimum Edge Distance 4-3/8" 
Minimum Fixture Hole Diameter (In Place) 1" 
Minimum Fixture Hole Diameter (Hole Spotted) 5/8" 
Inside Anchor Diameter-Bolt Diameter 5/8" 
Outside Anchor Diameter 7/8" 
Internal Thread Length 1-3/16" 
Brand Name CONFAST® 
Minimum Spacing 8-3/4" 
Maximum Torque 40 ft./lbs. 
Bolt Length Fixture Thickness + Embedment Depth 
2000 PSI Concrete - Pull-Out (lbs.) * 2492 
Length Measurement End to End 
Diameter 5/8" 
Length 2-1/2" 
Material Carbon Steel Zinc Plated 
Environment Dry 
Type Female 
* Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load
Application Video 

Installation Video 
Installing a 5/8" Drop-In Anchor Zinc Plated 
  1. Drill a 7/8" hole into the concrete using a carbide-tipped bit that meets ANSI Standards B212.15. 
  2. The depth of the hole can be deeper or equal to the minimum embedment depth of 2-1/2" which is equal to the length of the anchor . 
  3. Clean the hole with a wire brush, vacuum, compressed air, or a blow-out bulb. 
  4. Insert the anchor into the hole with the open threaded end facing up. 
  5. Take the correct 5/8" Drop-In Anchor Zinc Plated setting tool and insert the smaller diameter end into the threaded portion of the 5/8" Drop-In Anchor Zinc Plated.  
  6. Strike the end of the setting tool with a hammer until the anchor is fully set. 
  7. The 5/8" Drop-In Anchor Zinc Plated is now set. A 5/8" diameter threaded rod or a bolt can be inserted into it with a maximum torque of 40 ft. lbs. 
  8. Always use proper personal protective equipment per manufacturer's and OSHA instructions. 

Application Photos 
5/8" drop in anchor - concrete - threaded rod
View AllClose

Additional Information

Bit Size:
7/8"
Minimum Embedment:
2-1/2"
Type:
Female
Primary:
Concrete only
Environment:
Dry
2000 PSI Concrete - Pull-Out (lbs.) *:
2492
Diameter:
5/8"
Length:
2-1/2"
Material:
Carbon Steel Zinc Plated
Box Qty:
25
Minimum Spacing:
8-3/4"
Minimum Edge Distance:
4-3/8"
Minimum Fixture Hole Diameter (In Place):
1"
Minimum Fixture Hole Diameter (Hole Spotted):
5/8"
Inside Anchor Diameter-Bolt Diameter:
5/8"
Outside Anchor Diameter:
7/8"
Internal Thread Length:
1-3/16"
Length Measurement:
End to End
Bolt Length:
Fixture Thickness + Embedment Depth
Brand Name:
CONFAST
View AllClose